Conceived and manufactured to provide an initial approach to the world of Outline products, there are four models in the EIDOS range
Conceived and manufactured to provide an initial approach to the world of Outline products, there are four models in the EIDOS range (but there will eventually be seven) equipped respectively with 10-, 12- and 15-inch speakers, and a subwoofer with twin 15-inch speakers.
The lines of all the cabinets enable them to be also used as stage monitors. The models are two-way units fitted with a passive crossover. The compression driver (with 1-inch diaphragm) and the waveguide are the same on all three.
The Eidos 215 subwoofer is equipped with 15-inch long-throw loudspeakers that are also fitted with demodulating rings, in order to handle peak power values that exceed the loudspeakers’ electrical power capacity. The cabinets are built in 15mm birch plywood and included bracing to dampen internal resonance.
The Mini-COM.P.A.S.S self-powered compact VLA now incorporates the i-Mode Intelligent Loudspeaker Platform. Every parameter of the loudspeaker system can be set via web browser. The i-Mode audio architecture – which features digital audio inputs and outputs – enables the elimination of all other devices normally used to control loudspeaker enclosures. Mini-COM.P.A.S.S. also now offers Power over Ethernet.
The self-powered version of the LAB 21 infra-sub (also available in a passive version), is equipped with a 21-inch woofer able to handle peak power levels of 8kW. The addition of the abbreviation ‘HS’ (High Strength) indicates the sturdiness of the cabinet, able to stand up to the high stress involved in live use. Considered as an overall system, the LAB 21 HS SP ensures very high electro-acoustic transduction efficiency, thanks to its integration of the various domains: electrical, mechanical and acoustic. The coordination of these aspects along with feedback control of the output pressure by means of a DSP enables maximum energy transfer and output power control that fully respects input signals’ dynamics. It offers 148dB at 1m (peak) for a frequency range from 23 to 165Hz.
The DPA series of Class D amplifiers (2/4 channels) are all fitted with DSP (96kHz) and USB interface. Two models are available (2/4 channels): DPA 1002 and DPA 1004, with a power of respectively 2 x 1.25kW at 2Ω or 2.5kW (bridged) at 4Ω (DPA 1002); 4 x 1.25kW at 2Ω or 2 x 2.5kW (bridged) at 4Ω Ohms (DPA 1004).
Tel: +39 03 0358 1341