BSS Audio has added a cost-effective signal processor to its Soundweb London family of digital signal processors.
The new Soundweb London BLU-100 offers a fixed configuration of twelve inputs and eight outputs, configurable signal processing, logic processing and a fault tolerant digital audio bus. The configurable signal processing capability offered by the BLU-100 is roughly twice that of the Soundweb London BLU-80 and BLU-16 devices.
The analogue inputs of the BLU-100 provide software configurable gain in 6dB steps up to +48dB per channel and software selectable Phantom Power per channel. Phantom Power, Signal Present and Clip information per channel can be accessed via clear front panel LED indication without a PC. The BLU-100 features a low latency, fault tolerant digital audio bus of 48 channels which uses standard Cat 5e cabling giving a distance of 100m between compatible devices. Fibre media converters can be used to increase the distance between devices to over 10km using single mode fibre.
The BLU-100 is configured, controlled and monitored from HiQnet London Architect and is compatible with other members of the Soundweb London family. Its 48 channel digital audio bus represents channels 1-48 of the larger 256 channel digital audio bus when integrated with the BLU-800, BLU-320, BLU-160, BLU-120 and BLU-BOB devices and up to 60 digital audio bus compatible devices can share channels on a single bus. As with other Soundweb London devices, twelve Control Inputs and six Logic Outputs allow the BLU-100 to be integrated with GPIO compatible devices.
Tel: +1 801 566 8800