Ohm shakes your body

Ohm shakes your body

Published:

Going ‘where no sub has gone before’, Ohm’s Infra-Sub has now been unveiled. The cabinet houses two extra long excursion 18-inch drivers with a continuous power handling of 2,400W producing a max SPL of 136dB. Capable of outputting down to 21Hz, the infra-sub can couple with the manufacturer’s TRS-218 making it ideally suited to bass-heavy electronic music such as dubstep or drum and bass.

Ohm recommends using the subwoofer in the ratio of one per two TRS-218s, with two TRS-212s per stack to transform an ordinary gig into an ‘unrivalled listening experience’ with ‘chest-rattling’ bass.

A second release from Ohm aims to replace the need for a number of individual speakers, and as a result, wiring and installation costs. The manufacturer’s OS-12 ohmnisphere loudspeaker system features a 12-inch woofer coupled to a ‘conical radiator’ and four high frequency dynamic ring radiators – to project sound out over the full horizontal spectrum, forming a 360- x 140-degree coverage pattern.

Designed for installation into airports, gymnasiums, factories or clubs, the input panel contains two flying eyes and two Speakon NL4FC connectors. There are two ceiling-mount suspension points, and in environments with a suspended ceiling, the upper hemisphere can be partially or completely hidden.

Last up from the British manufacturer is the Daisy range of Class-D amplifier modules. Housed in an ‘extruded aluminium pod’, the unit has built-in DSP and output power up to 3,800W, in a 3U format, and can be coupled with up to five hardware modules yet still fit in a 19-inch rack.

The integrated 96kHz DSP can be accessed via Ethernet, USB or Ohm’s Spyder software. There is also an XLR input and link, which can accept a mono analogue or stereo AES digital signal.

The front panel has a settings display, signal LEDs and pre-set and channel mute buttons. Mains power is via a Powercon, and outputs are on eight-pole Speakon connectors.

There are four models in the range; the DM-1 (1-channel), DM-2 (2-channel), DM-3 (3-channel) that each produce 2,500W output on the first channel followed by 800W for subsequent channels, and the DM-4 (2-channel) providing dual 800W outputs.

Shipping: Now
Web: www.ohm.co.uk

Knowledge Centre

DWR presents MA Intermediate Training - Durban
Calendar
DWR presents MA Intermediate Training - Durban

to

Map 199 Percy Osborn Road, Morningside, Durban

more

Published:

WORLD

How to rig a Focus Venue stack

Take a first look at our upcoming modular Line Array - Focus Venue - and learn how to rig it. Learn more about Fohhn Beam Steering Technology: www.fohhn.com

more »


4K and Beyond: Technical Challenges and Opportunities - Atlona

pdf - PDF

Published:

WORLD

4K and Beyond: Technical Challenges and Opportunities - Atlona

When high-definition TVs (HD or 1080p) first entered the market, only three HDTV channels were available. Fast forward five years, the number of channels grew to 40. Today, over 20 years since the HD breakthrough, most streamed content is available …

more »


Our
Magazines

Subscribe to our magazines

If you would like to subscribe to one or more of our magazines please click on the SUBSCRIBE button to take you to our registration page.

Pro Audio Asia - July - August 2017
Pro Audio Asia
Pro Audio MEA - July - August 2017
Pro Audio MEA
Worship AVL - July - August 2017
Worship AVL