Radial Engineering introduces PhazeQ
Radial Engineering has launched the PhazeQ, a 500 series phase adjustment tool that also works as a phase cancelling device and summing equaliser.
The PhazeQ has been designed to work with the Radial Workhorse and other 500 series racks and features discrete Class-A electronics. A variable phase control shifts the incoming signal from 0-degrees to 180-degrees and then extends the effect to 360-degrees using a simple polarity invert switch. The blend control is set to 100 per cent wet when the PhazeQ is used in tandem with another track. When used by itself, the blend is rotated counterclockwise to set the desired wet-dry signal mix. To further focus the effect, a variable low pass filter allows the engineer to dial out high frequencies thus only applying phase cancellation to the bottom end. Front panel on-off switches make it easy to compare the phase and filter effects without having to reset dial positions.
‘The stand-alone Radial Phazer has become very popular for both live recording and studio use,’ stated company president Peter Janis. ‘It enables the engineer to quickly phase-align two signals to vastly improve stereo imaging such as with an x-y mic stereo pair; to improve the transient attack of a snare or kick drum when using top and bottom or in-out mics; or to fatten up the sound of an electric guitar by combining a direct feed with a room mic,’ he explained. ‘It's such a useful tool we decided to produce a 500 series version to fit inside our Workhorse. But what we did not realise was that one could actually apply the phase effect using a single source. By using phase cancellation, you can create radical ‘smile’ curves that can range from mild to extreme. With phase summing, you can boost frequencies to create abnormal effects. This is a quirky way to EQ things for sure, but a lot of fun!’