Single LCD monitor suspension with HoverPro
Adaptive Video Walls and Displays’ HoverPro is a single LCD monitor suspension device that allows a user to deliver visual messages and content without the limitations of wall mounting.
With HoverPro, content can be permanently displayed above and in front of an audience by suspending and aiming large LCD and plasma screens (over 1m) from any overhead structure.
Down-tilt aiming is accomplished by way of suspending the monitors from the HoverPro’s multiple suspension points. Meanwhile, an optional aiming device named the One-Way-Array may be installed in line above the HoverPro to provide up to 360-degrees of horizontal rotation.
Additionally, a variety of standard off-the-shelf rigging hardware is available to allow the installer to safely assemble and ‘hover’ the LCD or plasma monitor at any desired height and angle above an audience. Power is usually delivered along one of the suspension cables while the signal wire runs down the other suspension cable.
HoverPro adapts to the standard rear Vesa-mounting hole patterns built into flat screen monitors for safe rigging. Included rigging kits provide installers with the ability to safely suspend and tilt screens into a wide range of viewing angles from any location and distance from a roof.